double glazing window repairs
If the seals of double-glazed windows are damaged they could cause damp and mould. This could cause damage to the frame as well as the walls surrounding it, and also impacting your health.
Fortunately, resealing is a cost-effective method to repair the majority of uPVC window frames than replacing them. A glazier is usually able to clean the window frame and glass and then apply a new layer of sealant and smooth it.
Water Leaks
Window seals are made to prevent moisture to be kept out of your home. But, when they begin to wear down, it can cause water leaks around your windows. Not only is a leaky window irritating however, it could also cause significant damage to your home's structure. It is crucial to spot the issue early and get it repaired by an expert before it gets worse.
The cause of windows that leak can often be found not in the glass, but rather on the frame or sill. A leak in this area is the most typical sign of a failed window seal. This can be caused by damage to the seal caused by weather or aging, worn out caulking or even a blocked drain section resulting in an accumulation of ice or water.
Water that is visible between the double-glazed panes is a common indication that your window seal has failed. While this isn't quite as dangerous as a leak, since the water doesn't travel enough to reach your home. However, it does mean that the inert gas that is in between the panes has lost its lubrication, which will lower the insulation value of your windows.
Condensation in between the panes is another indication of a damaged seal. This may be caused by a failed window seal, or it could be due to a damp climate in your home or a problem with the glass. The condensation can not only be a nuisance, but it could cause the growth of mold and mildew within your home, which can be very difficult and expensive to eliminate.
It's time for you to examine your double-glazed windows when you see these signs. Repairing or replacing windows will safeguard your home against water leaks, reduce costs for energy, and also eliminate draughts. It's a small price to pay to ensure the safety and comfort of your family. Contact Thompson Creek Window to discuss your options regarding window seal replacement or repair. Our experienced professionals are happy to assist! We serve homeowners in the Mid-Atlantic.
Condensation
A broken double-glazing seal can allow water to enter the space that is used for insulation. This water could cause fogging or misting to the window panes.
If you see condensation forming inside your home it's time to call an experienced double glazing repair service. Condensation could indicate that the vacuum seal created by the factory failed and moisture has seeped into the insulated space.
Condensation can be caused by a range of causes, but most commonly by gaskets, sealants, or insulation in the uPVC frames of the windows. There are several options for repairing double glazing seals however it is essential that the new seals are properly size to ensure an ideal seal and a perfect fit.
Gaskets are usually made of polyurethane, which is a substance that can be used to seal gaps between double-glazed units. They are designed to last for a long time, but they can deteriorate over time because of wear and tear or exposure to changing temperatures and weather conditions.
As time passes the foam may shrink or crack, which causes a break in the seal, which allows moisture to creep into those areas of your double-glazed windows. This causes condensation but it can also result in the loss of energy efficiency, which means that you're losing heat from your home to outside air.
One option to fix this problem is to have the windows sealed. This is not a sure solution as it will remove the existing condensation and not address the root issues that are causing the double-glazed windows to leak or develop condensate.
Another option is to have your windows replaced completely. This should be done by a professional who offers an insurance backed guarantee. This means that in the event that the company fails or is shut down, you will remain protected by the insurance. It is important to note that the warranty on windows replacements should be a minimum of 10 years.
Misting
As autumn draws nearer it's a good idea to check that your double glazing seals are in good shape. Window seals that are damaged or worn out do are not just detrimental to the insulation properties of your windows, but can also lead to damp, mold and condensation. To prevent further damage to your double-glazed windows, and to reduce energy costs, it's important to repair any problems as soon as you can.
Double-glazed windows consist of two glass panes which are held together by a gas-filled interior space. A sealant layer on the outside covers the gap between the uPVC frame and the glass. This is crucial to maintaining the air-tight seal that keeps warm and cold air separated in your home, thereby saving money on your heating bills. Unfortunately, over time these seals may be damaged due to aging, weather conditions or even inadequate installation. Once this happens, the magic insulation formula that makes your double-glazed windows so effective could begin to degrade.
If the seals are damaged or defective and are not fixed they could cause dampness and condensation that can affect your health as well as the appearance of your window. Moisture and dampness can cause damage to ceilings, walls, floors and other surfaces in your home. They also create allergens and irritants which are detrimental to your health and the health of your family.
One of the most common issues that can occur with your double glazing is misting in between the panes. This happens when moisture is absorbed inside the insulated section of your windows. It can be difficult to repair without professional double glazing repair.
DIY solutions to this issue are available, however, we advise against them as they could be messy and cause damage to your windows. These methods involve drilling holes into your glazed unit and using chemicals to remove fog & condensation. This can cause many problems and, in particular, expose your windows to water damage that can ruin the unit altogether.
Professional glaziers have the expertise and tools required to effectively reseal your uPVC frames and give you long-lasting results. They can also provide advice on how to keep your uPVC window in good condition to avoid any future issues.
Draughts
A draught from your window is an indication that the sealant has failed and must be repaired or replaced. This will block cold air from entering your home. It will also increase energy efficiency, lower heating bills, and increase the comfort.
It is important to keep in mind that not all draughts come from window seals but rather from the gap between the frame and bricks. In some cases it may be possible to fix this by caulking the gap. If this doesn't work, you will need to have the seal professionally resealed.
When the sealant on double-glazed windows begins to break down, it allows water ingress. This can result in dampness or even mold. This could have a negative impact on health and can be very damaging to your property. It is crucial to take care of any water leaks when you spot them. And if your windows are still under guarantee it is advisable to check with the company you bought windows from, as they might cover the cost of the repairs.
The windows themselves are typically covered by a warranty that can last 10 years or more, but some companies offer lifetime warranties, so it's worth checking this information out. If your double glazing is under warranty, it's worth contact the company you bought the windows from as soon as you can and providing them with details of any issues you're experiencing. It is best to reach the company in person or by letter and email. This will ensure that everything is recorded and clear.
It is also important to remember that draughts can often be caused by faulty hinges rather than a lack of effective seals. The hinges are responsible for closing the window sash (the section that you open) but they can also become stiffer as time passes if they're not regularly oiled. This can create an opening between the sash and the frame, which can allow cold air to enter. Replacing the hinges will fix this issue, without affecting window seals.